SMACNA
Standards Code Books
SMACNA
Standards from The Sheet Metal and Air Conditioning
Contractor's National Association
Most Orders over $25 ship
FREE
with Super Saver Shipping
SMACNA Standards & Codes
Architectural Sheet Metal Manual - 6th Edition A Guide To Architectural Sheet Metal From
SMACNA
SMACNA Guide to Architectural Sheet Metal Fabrication and
Installation by SMACNA -- This Architectural Sheet Metal Manual has
the most comprehensive set of recommended practices available for
proper design and installation of custom fabricated architectural
sheet metal. This user-friendly revised edition uses figure numbers
not plates. It also contains master isometric roof plans keyed to
details; new rainfall rates and roof drainage design data for
scuppers, gutters and downspouts; revised roofing, flashing and
copings; louvers; roof and wall penetrations; galvanic corrosion;
ice dam control; wind uplift pressure test reports; metals selection
data; model project specifications; and soft metrics
HVAC Duct Construction Standards: Metal and Flexible Construction Standards for All Types of
Ducts and Ductwork
The new construction standards contain re-rated rectangular, round,
oval and flexible duct constructions for positive or negative
pressures up to 10 inches water gage (2500 Pa). Widths go to 120" in
gages 26 to 16. Diameters go to 84" in gages 28 to 16. New
performance requirements facilitate equivalent ratings for
non-illustrated construction. The data have been reorganized for
easy use and reference; includes metrics. Other revisions occur in
duct liner, hangers, fittings, vanes, dampers, tie rods and tests.
HVAC Duct Systems Inspection Guide - 3rd Edition Learn Inspection
Procedures for HVAC Ducts and Ductwork
The third edition of the "HVAC Duct Inspection Guide" is now
available from the Sheet Metal and Air Conditioning Contractors
National Association (SMACNA). The guide acquaints inspection
officials, designers and contractors with the basic features of duct
construction, equipment connections to ducts and items inserted in
ducts.
HVAC Systems Testing, Adjusting & Balancing - 3rd Edition Learn Testing,
Adjusting and Balancing Procedures for HVAC Systems
This new version has been extensively updated from the 1993 version
and includes all of the many changes that have taken place in the
HVAC industry. New sections covering VFD, DDC, lab hood exhaust
balancing, and the latest changes in balancing equipment and
procedures are included. HVAC Systems - Testing, Adjusting &
Balancing, 3rd Edition
Fire, Smoke & Radiation Damper Installation Guide for HVAC Systems -
5th Edition Application and Study Guide for Fire
Dampers, Smoke Dampers, etc.
An application and installation study guide for architects,
engineers, code officials, manufacturers and contractors. Covers
fire dampers, new breakaway connections, combination fire and smoke
dampers, heat stops, fire doors, framing of structural openings,
contract plan marking, installation instructions and special
applications.
Most Orders over $25 ship
FREE
with Super Saver Shipping
Order online: Add your item to your
shopping cart and submit your order online*.
Order online: Add your item to your
shopping cart and submit your order online*.
