Electrical Software

Most Orders over $25 ship FREE with Super Saver Shipping

Cost Estimating Software

2009 CD Estimator (Cost Estimating Software)
CD Estimator puts at your fingertips 85,000 construction costs for new construction, remodeling, renovation & insurance repair, electrical, plumbing, HVAC, painting and earthwork and heavy equipment. You'll also have the National Estimator program – a stand-alone estimating program for Windows that Remodeling magazine called a "computer wiz." a 70-minute interactive video teaches you how to use this CD-ROM to estimate construction costs. Includes Job Cost Wizard – turns estimates into invoices and exports both to QuickBooks.

2009 National Electrical Estimator
This year's prices for installation of all common electrical work: conduit, wire, boxes, fixtures, switches, outlets, loadcenters, panelboards, raceway, duct, signal systems, and more. Provides material costs, manhours per unit, and total installed cost. Explains what you should know to estimate each part of an electrical system. Includes a CD-ROM with an electronic version of the book with National Estimator, a stand-alone Windows estimating program, plus an interactive multimedia video that shows how to use the disk to compile construction cost estimates

Estimating & Bidding for Builders & Remodelers
Here is all the information you need for estimating and bidding construction and home improvement projects. Explains what you need for a career as a construction estimator, how to construct a take-off from the plans, how to check the details of an estimate, prepare a schedule, deal with subs, and calculate project overhead and profit. Also covers how to estimate remodeling work for typical remove and replace jobs, and include markup for remodeling work

Means CostWorks Estimator
3 Levels of Functionality:
Create customized estimates and detailed cost reports. Basic, Intermediate and Advanced Features.

Scale Master II / PC Interface Combo Pack
Portable, Digital Take-Off Tool With 91 Built-in Scales
For Construction Estimators, Contractors or Anyone Who Works with Blueprints - Thousands of construction pro's use the Scale Master II to bid faster and more accurately. Now it's time for you to gain the competitive edge, and perform take-offs with speed and confidence! Instantly double-check plans. Transfer data directly to your PC & estimating program (with included PC interface). Cut estimating errors and improve profits

Scale Master II
Portable, Digital Take-Off Tool With 91 Built-in Scales
For Construction Estimators, Contractors or Anyone Who Works with Blueprints - Obtain fast, accurate take-offs from blueprints in any scale, anywhere! Thousands of construction pro's use the Scale Master series of digital plan measures to bid faster and more accurately.
Also Available >> Optional PC Interface for Scale Master II

Electrical Business Software

Electrical Contractor Business Plan - MS Word / Excel - CD-ROM
The Electrical Contractor Business Plan is a comprehensive document that you can use for raising capital from a bank or an investor. This document has fully automated 3 year financials, complete industry research, and a fully automated table of contents. The templates also features full documentation that will help you through the business planning process. This is a full and complete business plan with original research, financial models, and marketing/advertising plans that are specific for an Electrical Contractor. Since 2005, BizPlanDB and its parent company have helped raise more than $100,000,000 through its developed plans

Electrical Service Start Up Business Plan - CD-ROM
Electrician Service Complete Start Up Business Plan NEW for 2008!Written In Microsoft Word Format For EASY EDITING! Complete Outline With Maps, Charts, & Graphs Lenders Are Looking For! Approved Format For SBA, Bank Lenders, Investors, & Government Grant Agencies!

Electrical Training Software

3 Phase AC Motors - CD-ROM
Training CD-ROM with Interactive Exercises, Voice Narration, Pop-Up Definitions, Animated Illustrations & Enlargeable Graphics
Polyphase induction AC motors are the workhorse of modern industry. This training teaches critical maintenance skills in an easy to use format. Learn how to diagnose voltage problems, size overload protection properly, and select the right motor for the job. With attention to concepts and practical skills, this training teaches a comprehensive approach to motor maintenance. Selected as the 2007 Product of the Year Winner by Plant Engineering Magazine.

AC Motor Controls - CD-ROM
Interactive Training CD With Exercises and Quizzes
Most AC motors are started through a standardized control system designed to protect the motor, the circuit, and operating personnel. This training tool focuses on ladder diagrams, wiring, and troubleshooting techniques for the most common motor used in industry, the AC induction motor. New interactive exercises and quizzes help you hone your troubleshooting skills. Introduction Purpose of a Motor Starter Components of a Motor Control Circuit NEMA Starter Size Numbering System Various Motor Starting Requirements - Single Speed, Multiple Speed, Reversing, Reduced Voltage, etc. Common Motor Circuits Symbols for Control Components Manual Starters Magnetic Motor Starter Operation Standard Two and Three Wire Control Wiring Diagrams vs. Ladder Diagrams Troubleshooting Using Ladder Diagrams Variations on the Motor Control Circuit 120-Volt Control vs. 480/240-Volt Control Control Transformers Proper Fusing and Grounding Multiple Start/Stop Stations Single Phase Motor Starting Time Delay and Latching Relays Pilot Devices - Pressure, Temperature, Level, and Limit Switches Power Circuits The Combination Motor Starters Checking Power Fuses and Breakers Wiring Up a Motor Starter Troubleshooting Control Circuits

Belt and Chain Drives - CD-ROM
Training CD-ROM with Interactive Exercises, Voice Narration, Pop-Up Definitions, Animated Illustrations & Enlargeable Graphics
The efficient transmission of mechanical energy has been paramount since the industrial revolution. Belt and chain drives have filled this need since the beginning, and are still in use today. Proper application of these drive elements provides only the foundation for reliable operation. This program teaches industrial manufacturing workers about mechanical power transmission, explaining engineering concepts, as well as best maintenance practices to achieve maximum operating time for various drive systems.

Electrical Safe Work Practices - CD-ROM
Training CD-ROM with Interactive Exercises, Voice Narration, Pop-Up Definitions, Animated Illustrations & Enlargeable Graphics
All persons who install, maintain, repair, or just work near electrical power equipment need electrical safety training. United States labor law spells out safe work practices and employee training requirements. This computer based training provides the information required by OSHA 29CFR1910 Subpart S, as well as other important safety information not required by OSHA.

Electrical Safe Work Practices - CD-ROM - Spanish
Spanish Training CD-ROM with Interactive Exercises, Voice Narration, Pop-Up Definitions, Animated Illustrations & Enlargeable Graphics
Todas las personas que instalan, mantienen, reparan, o trabajan cerca del equipo eléctrico necessita entrenamiento de seguridad eléctrico. La ley de trabajo de los Estados Unidos explica prácticas del trabajo y requisitos de entrenamiento seguros de empleado. Este entrenamiento computarizado proporciona la información requerida por OSHA 29CFR1910 Subsección S, y tambien la otra información importante de seguridad no requerida por OSHA.

Electrical Safety CD-ROM Course - CD-ROM
Employee Training Course for OSHA Training in Employee Electrical Safety
Using a powerful combination of audio, full-motion video, text and colorful graphics, this course from the Interactive CD-ROM Training Library provides the most cost-effective training available today. Features software which installs automatically, and comprehensive user's and trainer's guides. The course takes about 45 minutes to complete, and is divided into logical sections so information is easily understood... and retained. Courseworks: Also designed with the training manager in mind, all courses in the Interactive CD-ROM Training Library come with CourseWorks, a complete learning management system (LMS). Employees need to know how electricity works, and what they should do to protect themselves. The course reminds employees about electrical hazards in their jobs, and provides information they need to work safely around electricity. It assists in satisfying the OSHA training requirements under 29 CFR Part 1910.331 (Electrical Safety Standard) for "non-qualified" employees. Topics covered in these products include: How electricity works. Fuses and circuit breakers. Grounding and GFIs. Safe work practices. Outlets, plugs and extension cords. Working with electrical equipment. Using ladders around electricity. Electrical emergencies. and more

Three Phase AC Motors - CD-ROM
Training CD-ROM with Interactive Exercises, Voice Narration, Pop-Up Definitions, Animated Illustrations & Enlargeable Graphics
Polyphase induction AC motors are the workhorse of modern industry. This training teaches critical maintenance skills in an easy to use format. Learn how to diagnose voltage problems, size overload protection properly, and select the right motor for the job. With attention to concepts and practical skills, this training teaches a comprehensive approach to motor maintenance. Selected as the 2007 Product of the Year Winner by Plant Engineering Magazine.

Most Orders over $25 ship FREE with Super Saver Shipping


Order online: Add your item to your shopping cart and submit your order online for fast delivery.
EMail Us: Orders@Contractor-Books.com
	Contractor-Books.com Home Page