Electrical Specialty Tools
Professional Quality Specialty Tools Designed Specifically for Electricians

  Most Orders over $25 ship FREE with Super Saver Shipping

Specialty Tools for Electricians

Conduit Bender Torpedo Level - 6-1/2" - Swanson TL041M
Terrific Torpedo Level Aids in Bending Conduit to the Proper Angle
Machined Billet Aluminum construction. V-Groove Edge. Brightview machined vial surrounds. Rare-earth magnets for Savage Grip strength. Anti-Dog attachment for bending pipe. Permanently sealed vial caps ! Level indicators for Horizontal and Vertical Level, 45 degrees and 22.5 degrees.

Die Cast Magnetic Torpedo Level with 360° Leveling Vial and V-Groove Frame
Incredible Magnetic Level with Rotating Level Vial - Lifetime Warranty
Stabila 25360 - Die Cast Magnetic Torpedo with 360 degree vial and V-groove frame. Heavy Duty die-cast frame with big, bright easy to read vials. Certified Level accuracy in top read position is 1/32" over 72". Level accuracy guaranteed for life, vials will never fog, leak or require adjustment, bent levels void warranty

Fish Tape Puller - FT-210
Provides Two Handed Wire Pulling in Safety
Quickly and securely clamping a fish tape by its cam action hinge, this tool provides two-handled pulling leverage of a fish tape. It also safely holds the tape regardless of the pulling force & prevents kinks in the tape. It also eliminates using pliers that can slip off the tape causing possible injury to the installer. Made of hardened steel casting, it is 11" long. Cam action, "hingenious" Fish-Tape Puller. Two handed action for twice the force. Stop putting kinks in your fish-tape or grazing your face with your pliers. Put your hands on this quality tool and you'll never let go, a must for your tool box! Handsome precision machined body, 10 oz. 12 inches long. 100% made in U.S.A. Safer than pliers - a must for your toolbox!

Precision Cable Stripper - Seatek VT-120 Vee-Twin
Strips Cables from 1/2" to 2-1/8" Quickly and Perfectly!
Do you have cables that are almost impossible to strip? The Vee-Twin Stripper will now easily and precisely strip the jacket off these cables. Often the only option for difficult rubber and plastic jacketed cables is to use a knife. This is not only a time consuming and inaccurate way to remove a cable jackets, it often leads to injuries. This is where the Vee-Twin steps in. Easy to adjust, safe to use, and can fit into difficult to reach locations. Strip in place, even around curved cables! -Works great on cables from 1/4" to 2 1/8" O. D. -The Vee-Twin features a blade that can be rotated 90 degrees between ring-cutting and straight cutting - without removing the tool from the cable! -Unique vee guide that permits the cable to smoothly rotate in any direction, even create "windows' in the cable jacket! -Depth of cut setting accurate to . 001" thanks to a precision micrometer. No need to adjust blade depth when switching from ring to straight cut. -Quick-sliding blade adjustment quickly changes size to strip cable up to 2-1/8" - Blade is safely enclosed within the tool, no more stripping cables with a dangerous open ended knife. -No other tool on the market can strip as many different cables in such a compact, easy to use package

PowerFast Strap Gun for Strapping Electrical Wire
Save Time on the Job with this Unique Strapping Gun
Saves time and money! The PowerFast Strap Gun is a unique tool that provides huge time/cost savings for Electricians! The PowerFast Strap Gun eliminates the risk of pinching or cutting the cable by using a depth stop. Electricians report time savings of up to 30% on a typical wire pulling job

Roto-Flex Greenfield Cutter - 1/2" to 3/4". SE
Heavy Duty, Professional MC Stripper
High Quality, Heavy Duty MC Stripper made specifically for professionals who need tools that last and work every time.  The Roto-Flex Greenfield Cutter makes quick work of stripping MC cables from 1/2" to 3/4" in diameter.  This handy pocket sized tool belongs in every electrician's tool kit.

Single/Double Gang Box Level Tool & Cut Template
Unique Cutting Template and Level for 1-Gang and 2-Gang Boxes
Mark and cut precise holes in paneling and drywall every time. Built in 90 degree offset bubble levels for marking boxes vertically or horizontally. Preformed template makes marking single and double gang boxes a cinch.

Swing-Saw Portable Hack Saw & Vice Combo - SW-130
Cuts up to 1-1/2" with a square cut every time!
The labor saving Swing-Saw is a clever handheld combination vise and hacksaw. The top lever is moved back and forth and the body of the Swing-Saw is squeezed clamping the vise on both sides of the part. Maximum vise opening is 1-1/2. Unlike a conventional hacksaw and vise, the Swing-Saw has a six to one leverage advantage, providing strong cutting action. The Swing-Saw makes a perfectly square cut every time! You can start a cut exactly where you want, no more skidding all over the part with a hack saw blade or jumping out of a cut already started. Best of all cut or nicked fingers are a thing of the past! CUT ALMOST ANYTHING, EVEN SQUARE TUBING! The Swing-Saw is not limited to the cutting of tubing. As a matter of fact, metal or plastic extrusions, shelving tracks, storm window frames, flexible conduit, AC cable, hoses, threaded rods and bolts, molding and wood dowels, can be cut efficiently by this hand tool with a minimum amount of burrs.

Wire Jacket Ripper - JR-128
Safely Strip Service Entrance & Large Plenum Cables
The JR-128 Jacket Ripper is an easy to use straightforward tool and your tool pouch shouldn't be without one! Don't use a knife or open ended razor blade to strip large diameter cables such as service entrance, instead use the compact Jacket Ripper. Hook the front portion of the blade between the wires and the jacket. Pull on the comfort grip handle to strip to the cable to desired length. Peel back and clip off the jacket with a diagonal pliers. The JR-128 is much easier to use than a knife and it is also safer and faster! The better way to remove the jacket of medium & large multi conductor cables. Use on service entrance, plenum, multi-pair & tray cables. Even strip jackets from some liquid-tight, flex or MC! Prevents nicking of internal conductors. Blade can be easily replaced, simply remove the two screws install a new blade Cat. B-228