www.Contractor-Books.comSaturday, November 7, 2009
One Stop Shopping for Construction Books, Code Books, Contractor Tools & Equipment
Digital Multimeter Adapters & DMM Adapters
Adapters for Digital Multimeters That Provide
Additional Capabilities for Your Multimeter
Most Orders over $25 ship
FREE
with Super Saver Shipping
Datalogging
Multimeters
2000A
AC / DC Clamp-On Multimeter DMM Adapter - Extech
380905
Connects to any
Multimeter To Provide Clamp-On Meter
Functionality 2.5" (64mm) clamp jaw opening (750MCM).
Measures AC/DC Current in two ranges: 0 to
200A and 0 to 2000A and converts it to
1mV/count for reading current on any
multimeter or voltage recorder. Banana plugs
connect into standard multimeter sockets and
switch multimeter to a Millivolt or voltage
range. Accurate to 2% up to 200A, 3% to
1500A. Zero adjust knob for optimizing
accuracy. Dimensions: 7.7 x 2.6 x 1.4"(195 x
66 x 35mm), Weight: 1.1lb (500g). Complete
with built-in banana plugs and 9V battery.
3000A
AC Current Clamp - Fluke i3000s
Optional Accessory for
Use with Fluke Digital Multimeters
Accurate current measurements are critical
to resolving power quality problems in
commercial and industrial power distribution
systems. Fluke now offers three clamp-on ac
current probes and one ac/dc current probe
that boost the performance of any
oscilloscope or voltage input device capable
of millivolt measurements. --- Safety
Designed: The i3000s is rated for 600V ac
circuits of Overvoltage Category III (and
300V ac circuits of Overvoltage Category
IV), per IEC 1010.
Foot
Candle MultiMeter Adapter - Extech 401020
Turns Your Digital Multimeter Into A
Lux Light Meter Measures 0-50,000 Lux. Photo diode sensor prolongs life
and enables instrument to cover wide ranges. Banana plugs
insert directly into your multimeter, switch to 200mV range
and aim sensor for reading on your multimeter.
Foot
Candle MultiMeter Adapter - Extech 401021
Turns Your Digital Multimeter Into A
Foot Candle Light Meter Measures 0-5,000 Fc. Photo diode sensor prolongs life
and enables instrument to cover wide ranges. Banana plugs
insert directly into your multimeter, switch to 200mV range
and aim sensor for reading on your multimeter.
Non-Contact
Photo Tachometer Multimeter Adapter - Extech 461900
Turns Any Digital Multimeter into a
Non-Contact Photo Tachometer Measure from100 to 19990rpm. Outputs 0.1mV/rpm when
plugged into a multimeter. 1.2% basic accuracy. CE approved.
Complete with 4.5ft (1.4m) cable and banana plugs, 23"
(0.6m) reflective tape, and 4 AA batteries.
Most Orders over $25 ship
FREE
with Super Saver Shipping
Order online: Add your item to your shopping cart and
submit your order online for fast delivery.
Order online: Add your item to your shopping cart and
submit your order online for fast delivery.
