Over 22,000 Construction Books, Code Books, Contractor Tools, National Electrical Code Books, and Test Equipment www.Contractor-Books.com  Saturday, November 21, 2009
Over 22,000 Construction Books, Code Books, Contractor Tools & Equipment
Home     Books     Codes     Calculators     Tools    Test Equipment     New Products     View Cart    

Multimeters With PC Interfaces
Multimeters That Can Transfer Readings to A PC Through A PC Interface Including RS-232 & USB Connections

 Look for the FREE Shipping Truck Most Orders over $25 ship FREE with Super Saver Shipping Look for the FREE Shipping Truck

Multimeters With PC Interfaces

Extech MultiScope, 110Volt, 5MHz Dial Input

EX-381295
$499.99

Extech Instruments5MHz Dual Channel MultiScope - Extech 381295
Handheld Oscilloscope and Autoranging True RMS Digital Multimeter
Easy to use menu driven operation. Internal or External Triggering. Auto or Manual setup for horizontal and vertical scaling. Single shot mode. Window freeze locks waveform in the display. Roll Mode for slow repetition waveforms. Store and Recall up to 16 waveforms and setups. Sampling Time: 25MS/s Dual Channel; 50MS/s Single Channel. 132 x 128 Pixel Super-Twist two level backlit display. Data Hold and Low Battery indication. Multimeter functions include AC/DC Voltage, Resistance, Continuity. Frequency, RPM, Pulse Width, and % Duty Cycle.

Process Calibrator MultiMeter
EX-CMM-17
Out of Stock

Extech InstrumentsCMM-17 Process Calibrator MultiMeter
Precision DC, mA, Voltage, Frequency Calibrator Combined with True RMS MultiMeter
Simultaneous source/simulate and measure on large dual display. Precision 0.03% accurate voltage and current calibration source. Constant current output for loads up to 1200Ω. Bipolar current (±25mA) and voltage (±1.5V, ±15V) outputs. Simultaneously source 15V excitation voltage and measure mA output of 2-wire transmitters. % of scale readout for 4 to 20mA or 0 to 20mA. Wide range Frequency (square wave) source with adjustable amplitude, pulse width, and duty cycle. Programmable 16 continuous or timed step outputs, or 999 step ramp

MultiLog Datalogger MultiMeter

EX-ML720
$309.99

Extech InstrumentsMultilog Datalogging Multimeter - Extech ML720
Log & View up to 43,000 Data Points for Outstanding Monitoring
43,000 data point memory. 10 selectable sample rates from 0.05 second (50ms) to 480 seconds (8 minutes) per sample for high speed collection or long time studies. 10 measurement functions including AC/DC Voltage and Current, Resistance, Temperature, Frequency, Capacitance, Diode and Continuity. View directly on LCD display with quick min/max. Optically isolated RS-232 PC interface with Windows software (included) allows user to collect, display, plot, save or export data or graphs. High basic DC Voltage accuracy of 0.08%. True RMS measurements for AC Voltage and Current. Wide AC Voltage bandwidth of 40Hz to 20kHz. Temperature function with selectable °F/°C units. Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01, 0.01nF, 0.001Hz). Rugged design with protective holster and water resistant housing.

MultiPro Professional MultiMeter

EX-MP510
$149.99

Extech InstrumentsMultiPro High Performance Multimeter - Extech MP510
High Performance Autoranging Digital Multimeter with RS-232 Interface
High basic DC Voltage accuracy of 0.08%. Measurement functions include AC/DC Voltage and Current, Resistance, Frequency, Capacitance, Diode and Continuity. Wide AC Voltage bandwidth of 40Hz to 20kHz. Rugged design with protective holster and water resistant housing. Optically isolated RS-232 PC interface with Windows software (optional) allows user to collect, display, plot, save or export data or graphs. Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01, 0.01nF, 0.001Hz). Smart auto power off is disabled if signal is present at test leads. Hold and low resistance auto-lead zero. Complete with built-in stand, CAT. III test leads, protective holster.

MultiPro True RMS Professional MultiMeter w/ Temp
EX-MP530
Out of Stock

Extech InstrumentsMultiPro True RMS Industrial Multimeter with Temp - Extech MP530
High Performance Autoranging Digital Multimeter with Temp
High basic DC Voltage accuracy of 0.08%. Measurement functions include AC/DC Voltage and Current, Resistance, Frequency, Capacitance, Diode, F/°C Temperature function & Continuity. Wide AC Voltage bandwidth of 40Hz to 20kHz. Rugged design with protective holster and water resistant housing. Optically isolated RS-232 PC interface with Windows software (optional) allows user to collect, display, plot, save or export data or graphs. Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01, 0.01nF, 0.001Hz). Smart auto power off is disabled if signal is present at test leads. Hold and low resistance auto-lead zero. Complete with built-in stand, CAT. III test leads, protective holster & Temperature Probe.
 

 

 Look for the FREE Shipping Truck Most Orders over $25 ship FREE with Super Saver Shipping Look for the FREE Shipping Truck

View Cart   Credit Cards Accepted   Check Out

  Order Online Order online: Add your item to your shopping cart and submit your order online for fast delivery.

 EMail Us:  Orders@Contractor-Books.com

  Back to Top of Page

Contractor-Books.com
Home Page

Secure Server