Most Orders over $25 ship
with Super Saver Shipping
Non-Contact Laser &
Photo / Contact Tachometer + IR Thermometer
Photo / Contact Tachometer Includes a
Non-Contact IR Thermometer for Surface Temperature
Built-in IR thermometer with laser measures remote
surface temperature on motors and rotating parts. Wide
Temperature range of -4 to 572°F (-20 to 300°C). Fixed 0.95
emissivity, 6:1 distance to target ratio. Provides wide RPM
(photo and contact) and Linear Surface Speed (contact)
measurements. Accurate to 0.05% with max resolution of
0.1rpm in either photo or contact mode. Large 0.4" (5 digit)
LCD display. Non-contact Photo tachometer uses a Laser for
greater measuring distance up to 6.5ft (2m).
Contact tachometer for RPM and surface speed measurements.
Contact / Photo Tachometer
Contact and Non-Contact Motion and RPM
Measurements With Reversing Display
Unique display where characters reverse direction
depending on measurement mode you are in. Large 0.4" 5 digit
LCD digital display. Microprocessor based with quartz
crystal oscillator to maintain high accuracy. Tachometer
memory stores last, max and min readings. Provides wide RPM
(photo) and Linear Surface Speed (contact) measurements.
Microprocessor precision, Accurate to 0.05%. Permits
readings to a resolution of 0.1 RPM in either photo or
contact mode. Complete with wheels for linear surface speed
or RPM measurements, four 1.5 volt AA batteries, reflective
tape and carrying case.
Photo & Contact Tachometer
Combination Contact & Laser Photo
Tachometer with Built-in Laser Allows Non-Contact
Measurements up to 6.5 feet from Target
Narrow beam Laser photo tachometer for accurate
non-contact RPM measurements. Measurements from up to 6.5ft
from the target for improved safety and accessibility.
Display characters reverse direction for measurement type
selected. Large 0.4" (5 digit) LCD display. Microprocessor
based with quartz crystal oscillator to maintain high
accuracy. Tachometer memory stores last, max and min
readings. Provides wide RPM (photo and contact) and Linear
Surface Speed (contact) measurements. Accurate to 0.05% with
max resolution of 0.1rpm in either photo or contact mode.
Long Distance Non-Contact RPM and
Laser light source for accurate measurements at long
distances. Non-contact measurements from 10 to 100,000rpm.
Built-in memory recalls Last/Max/Min value stored. Use
reflective marker on object to be measured and point the
laser light beam for accurate readings updated every second.
Large 5 digit LCD display is easy to read. Up to 6.5 feet (2
meters) measurement distance (depending on ambient light).
Photo Tachometer Counter
Laser Light Source Tachometer For
Greater Accuracy and Measuring Distance
Make non-contact measurements up to100,000 RPM of
rotating objects with accuracy of 0.05%. Use reflective tape
on object to be measured and point the integral laser.
Memory button holds last reading and recalls min/max
readings. Counter function counts up to 99,999 revolutions.
Easy to read large 5 digit LCD display. Rugged double molded
housing for better grip. Complete with 9V battery and
Photo Tachometer Multimeter Adapter
Turns Any Digital Multimeter into a
Non-Contact Photo Tachometer
Measure from100 to 19990rpm. Outputs 0.1mV/rpm when
plugged into a multimeter. 1.2% basic accuracy. CE approved.
Complete with 4.5ft (1.4m) cable and banana plugs, 23"
(0.6m) reflective tape, and 4 AA batteries.
Mini Photo Tachometer With Reflective Tape
Pocket Sized Photo Tachometer for RPM
Non-contact integral light beam model with ideal
measurement range up to 6" (150mm) distance. Large easy to
read (99,999 count) LCD display. Autoranging with 0.1% basic
accuracy. Hold button freezes displayed reading.
Ergonomically designed and pocket sized housing with
protective finger guard. Easy to operate by simply
contacting the rotating object with the sensor tip and read.
Industrial Instruments and Controls Handbook
- 5th Edition
Methods for Increasing Process
Efficiency, Production Rates and Quality
Award-winning editor Greg McMillan has loaded
Process/Industrial Instruments and Controls Handbook, Fifth
Edition, with advice from top technical experts to help you
tackle process instrument and control assignments
confidently and solve problems efficiently. This major
revision of the bestselling on-the-job toolkit includes
time-saving tables, selection ratings, key points, rules of
thumb and hundreds of topic-defining illustrations. Updated
to mirror the most common industry practices, it brings you
up to speed on smart instrumentation and the latest advances
sparked by increased power and miniaturization of the
microprocessor. Thorough coverage of the Windows NT platform
and Fieldbus... distributed control systems and field-based
systems...knowledge-based operator training...instrument
maintenance cost reduction and an overview of the ISA/IEC
Fieldbus Standard help you get the most out of these major
shifts in technology. 1200 pages.