 MultiScanner
OneStep
Finds the center of studs
in one pass!
Revolutionary
CenterVision™ technology pinpoints the stud
center, not just the edge.
MultiScanner OneStep is a five-function scanner:
AC Tracing
Turn off wood and metal scan to look only for hot AC to find
and trace wires, even in plastic conduit.
Stud Finder
MultiScanner® OneStep™ finds the edges of studs and joists
up to 3/4 inches (19 mm) deep in normal mode.
Stud DeepScan® Mode
In Zircon's patented DeepScan® mode,
MultiScanner® OneStep™ can find studs up to
1-1/2 inches (38 mm) deep behind drywall, paneling, or
plywood.
Metal Finder
Finds copper and other non-ferrous metal up to
1-1/2 inches (38 mm) deep.
Finds ferrous metal such as rebar in concrete up to
3 inches (76 mm) deep.
 AC WireWarning™
Continuously detects hot unshielded AC wiring—an important
safety feature.
 Key Features
-
Exclusive—finds the stud center
- Finds both
wood and metal studs
- AC scanning
to trace hot wires
- Metal
scanning for finding pipes, nails, rebar, and other hidden
metal
- Large
easy-to-see back-lit LCD screen
- Patented
SpotLite® Pointing System
- Patented
DeepScan® dual sensitivity scanning
- Constant hot
AC WireWarning™ in all modes for safety
Applications
Find the center and edges of wood
or metal studs or joists to:
- Hang
cabinets, pictures, mirrors, and shelves securely
- Install
ceiling fans, grab bars, and chandeliers
- Find metal
pipes behind tile and in concrete
- Find
conduit, rebar, electrical boxes, exhaust vents, and
ducting
- Trace hot
wires behind walls, floors, and ceilings
The ZIRCON
Advantage
-
Patent-pending CenterVision™ Technology finds the stud
center in one step.
- Turn off
wood and metal scan to look only for hot AC to find and
trace wires, even in plastic conduit.
- Uses a
patented sensor to pinpoint the center and edges of wood
or metal studs behind walls, floors, or ceilings.
- Metal-only
setting looks specifically for metal pipes or rebar.
- Back-lit LCD
screen. Easy-to-understand, on-screen graphics and audio
signal indicate target.
- Exclusive,
patented SpotLite Pointing System shines a bright beam of
light over target center.
- Patented
dual-sensitivity scanning—normal up to 3/4 inches (19 mm)
or DeepScan® up to 1-1/2 inches (38 mm).
Technical
Information
|
Dimensions |
6.38 in. H x 3.07 in. W x 1.34 in. D
(162 mm x 78 mm x 34 mm) |
|
Weight |
6.5 oz. (184 g) without battery |
|
Battery type |
9-V alkaline (not included) |
|
Estimated battery life |
2 years at 10 minutes per day
with alkaline battery |
|
Position accuracy |
Stud Scan mode: typically within 1/8 in. (3 mm)
DeepScan mode: typically within 3/16 in. (5 mm)
Metal Scan mode: typically within 1/2 in. (13 mm) |
|
Detection Depth |
Up to 3/4 in. in Stud Scan
mode
Up to 1-1/2 in. in DeepScan mode
Up to 1-1/2 in. for copper in Metal Scan mode
Up to 3 in. deep for rebar in Metal Scan mode
NOTE: Sensing depth and edge detection can vary
due to moisture content of materials, wall texture,
paint, etc. |
|
AC Position Accuracy |
Typically 90–250 V at 50–60
Hz laterally within
6 in. (150 mm) of a hot unshielded wire |
|
AC Sensing Depth |
Typical depth of 2 in. (50
mm) |
|
Operating temperature |
20° to 120°F (-7° to 49°C) |
|
Storage temperature |
-20° to 150°F (-29° to 66°C) |
|
Humidity |
80% RH (noncondensing) |
|
Water resistance |
Splash and water resistant,
not waterproof |
|
Order online: Add your item to your shopping cart and
submit your order online*.
Order
offline: Add your item to your shopping cart and print an
offline order form*. Mail or fax your order to us 
