Hitachi NV45AE Coil Roofing Nailer with Side Load Magazine

Product Description: The NV45AE coil roofing nailer combines Hitachi's traditional two (2) cylinder valve firing system with new features and next generation "Industrial Design." Low recoil, cylinder valve system, optimized weight and well-balanced design provide the best driving feel for users. Minimal air consumption per shot and a pneumatic air feeding mechanism deliver stable shooting nail after nail. Features: Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation. Consumes 30% less air allowing for more productivity. 30% faster bump firing speed. 30% less recoil for optimized kick back to propel nailer across the course. Constructed with all aluminum components. Improved push lever design has integrated holes to expel excess tar and grime. 2-piece push lever lower segment can be easily removed for maintenance. 3-point carbide insert on nose piece increases life. Improved rubber composite guard wraps the side-edge of the magazine and critical points on the body to endure harsh working conditions. Non-slip texture keeps tool from sliding down a pitched roof. Side loading magazine allows for quick loading. Last nail magnet holder holds final nail in coil in place. Tool-less depth of drive dial can be adjusted on the spot. Elastomer composite material covers the grip. Ergonomic design and exceptional tool balance reduces user fatigue injuries. Accepts 7/8" - 1-3/4" fasteners with wire coil collation. 5.5 lbs, lightweight for easy maneuverability. Includes: Safety Glasses (875769), Hex Bar Wrench 4mm (943277), Hex Bar Wrench 5mm (944459). Specifications: Fastener Type - Coil, Wire Collation. Magazine Angle - 16 Degrees. Fastener Length Capacity - 7/8" to 1-3/4". Fastener Diameter Range - 0.120". Magazine Capacity - 120 Nails. Operating Pressure - 70-120 psi. Actuation - Selective ( Seq./Bump). LxH - 9-27/32" x 10-3/8". Weight - 5.5 lbs. Air Consumption - 1.0 I/Shot. Noise Level - 85 dB. Vibration Level - 3.94 m/s2.

Features:

• Side Load Operation
• Last Nail Magent
• New Full Round Driver Balde
• Tool-less depth of drive adjustment
• Pneumatic Power Feed and Return

More Information:

The Hitachi NV45AE Coil Roofing Nailer is designed to please with convenient features and comfort achieved with ergonomics.  This Coil Roofing Nailer has a side-load magazine that makes it quick and easy to replenish nails as you run out.  The NV45AE also has a magnet that holds the last nail of the coil in place to prevent misfires.  This Nailer gives the user exceptional control with elastomer grips and a lightweight design that allows for easy maneuverability. Features: Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation even in the harshest of conditions Consumes 30 percent less air allowing for more productivity time per compressor cycle 30 percent faster bump firing speed for a rapid finish 30 percent less recoil for optimized kick back to propel nailer across the course Constructed with all aluminum components for durability Patented and improved push lever design  has integrated holes to expel excess tar and grime build-up Two-piece push lever lower segment can be easily removed for maintenance or replacement Three-point carbide insert on nose piece increases life and reduces wear Improved rubber composite guard wraps the side-edge of the magazine and critical points on the tool body to endure harsh working conditions Non-slip texture keeps tool from sliding down a pitched roof Last nail magnet holder holds the final nail in the coil in place to prevent loss or misfired nails Tool-less depth of drive dial can be adjusted on the spot to meet the application for ultimate convenience Ergonomic design and exceptional tool balance not only reduces user fatigue and repetitve injuries, but also provides more control during use Accepts 7/8-inch - 1-3/4-inch fasteners with wire coil collation What's In The Box: Hitachi NV45AE Coil Roofing Nailer Saftey Glasses Hex Bar Wrenches

Tools & Hardware
ISBN-13: 0717709012868
UPC: 717709012868
Manufacturer: Hitachi  
Model: NV45AE